T 4.40 DV
Rotary vane pressure/vacuum pumps, oil-free
The T 4.40 DV is an oil-free combination pressure/vacuum pump for blast and suction air. It is a rugged and durable pump designed to operate on a continuous duty basis. This dry-running displacement pump utilises self-lubricating, graphite composite vanes and requires only minimal maintenance.
- Built-in, large inlet filter
- Pressure and vacuum regulating valves
- Vibration isolators
|Volume flow 50 Hz||35 m³/h|
|Pressure/Vacuum relative 50 Hz||±0.5 bar|
|Power 50 Hz||1.25 kW|
|Noise Level 50 Hz||66 dB(A)|
|Volume flow 60 Hz||43 m³/h|
|Pressure/Vacuum relative 60 Hz||±0.5 bar|
|Power 60 Hz||1.5 kW|
|Noise Level 60 Hz||68 dB(A)|
|Weight||38.5 kg with motor|
- 100% dry-running (oil-less) operation
- Quiet operation
- Long vane life
- Continuous duty rated
- Single shaft direct drive
- Compact design
- Variety of motors available
- Low operation and maintenance costs
- No cycling times
- Quiet operation – no silencer enclosures necessary
- Small footprint for space savings
- Straightforward construction for fast and easy service on-site to reduce downtime
Printing and Paper Industry
Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.
General Mechanical Engineering
Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.
Vacuum pumps and vacuum systems from Becker are the ideal solution for holding goods and components in place during production, processing, and packaging.
Pick & Place
Many modern production processes require the use of vacuum to transport, lift, and place goods and materials, including feeders for printing, secondary packaging, and other automatic loaders.
Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.
Blowing & Injecting
Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.
Thank you very much for your message. We will get back to you as soon as possible.
PLEASE COMPLETE THE FORM BELOW.
"*" indicates required fields
YOU WOULD LIKE TO
CONTACT US DIRECTLY?
Becker Druk- en Vacuümpompen B.V.
8447 SP Heerenveen
T +31(0)513 65 18 00
Here you can find the contact close to you, because our support is available almost everywhere in the world. We are here for you!