Get in touch

BCP 300

Claw compressors

The BCP 300 is a low pressure displacement pump. It is air-cooled, contact free and requires only minimal maintenance.

 

  • Pulsation damper
  • Built-in suction filter with clear cover
  • Vibration isolators

Specifications

Volume flow 50 Hz275 m³/h
Pressure relative 50 Hz+1.6 bar
Power 50 Hz15.0 kW
Noise Level 50 Hz82 dB(A)
Volume flow 60 Hz325 m³/h
Pressure relative 60 Hz+1.6 bar
Power 60 Hz15.0 kW
Noise Level 60 Hz86 dB(A)
Weight205.5 kg without motor

Features

  • 100% oil-less operation chamber
  • Air-cooled
  • Non-contact compression
  • Continuous duty rated
  • Single shaft direct drive
  • Compact design
  • Variety of motors available
  • Internal filtration with clear cover
  • Pulsation damper

Benefits

  • No external filters needed
  • Low maintenance, minimal maintenance costs
  • Straightforward construction for fast and easy service on-site to reduce downtime
  • Low energy consumption, low energy costs
  • Quick visual check of filter status

Video Thumbnail BCV and BCP

Markets

  • Printing and Paper Industry
    Printing and Paper Industry

    Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.

  • Environmental Industry
    Environmental Industry

    Vacuum pumps and compressors from Becker are the preferred solution for sparging, wastewater treatment, and aeration.

  • General Mechanical Engineering
    General Mechanical Engineering

    Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.

Applications

  • PNEUMATIC CONVEYING
    Pneumatic Conveying

    Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.

  • BLOWING & INJECTING
    Blowing & Injecting

    Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.

Download

Product request

PLEASE COMPLETE THE FORM BELOW.

"*" indicates required fields

 

YOU WOULD LIKE TO
CONTACT US DIRECTLY?

 

Becker Polska Sp. z o.o.
Pianowo 46
64-000 Kościan
Polska

 

Tel. 655114170
info@becker-polska.com

 

 

 

Becker_Icon Magnifying glass_white

BECKER REPRESENTATIVE

Here you can find the contact close to you, because our support is available almost everywhere in the world. We are here for you!