Rotary vane compressors, oil-free
Becker DTLF series compressors are low pressure, dry-running displacement pumps and are designed to operate on a continuous duty basis at any pressure level from open flow to +1.8 bar. The DTLF series oil-free rotary vane pumps utilise self-lubricating, graphite composite vanes, specifically engineered for Becker pumps. No oil to change and only minimal maintenance is required.
Each DTLF series pump comes standard with:
- Built-in, large inlet filter with clear cover
- Pressure relief respectively safety valve
- Vibration isolators
- Discharge silencers
Product information / specifications
|Volume flow 50/60Hz||Pressure relative 50/60Hz||Power 50/60Hz|
|DTLF 2.200||174/216 m³/h||+0.8/+0.8 bar||5.5/6.6 kW|
|DTLF 2.200||174/216 m³/h||+1.5/+1.5 bar||7.5/9.0 kW|
|DTLF 2.200||174/216 m³/h||+1.8(+2.0)/+1.8(+2.0) bar||11.0/13.2 kW|
|DTLF 2.250||247/294 m³/h||+0.8/+0.8 bar||7.5/9.0 kW|
|DTLF 2.250||247/294 m³/h||+1.5/+1.5 bar||11.0/13.2 kW|
|DTLF 2.250||247/294 m³/h||+1.8(+2.0)/+1.8(+2.0) bar||15.0/18.0 kW|
|DTLF 2.250 K||240/284 m³/h||+0.8/+0.8 bar||7.5/9.0 kW|
|DTLF 2.250 K||240/284 m³/h||+1.5/+1.5 bar||11.0/13.2 kW|
|DTLF 2.250 K||240/284 m³/h||+1.8/+1.8 bar||15.0/18.0 kW|
|DTLF 2.360||360/N/A m³/h||+0.5/N/A bar||11.0/N/A kW|
|DTLF 2.360||360/N/A m³/h||+0.9/N/A bar||15.0/N/A kW|
|DTLF 2.400||365/440 m³/h||+0.9/+0.9 bar||11.0/13.2 kW|
|DTLF 2.400||365/440 m³/h||+1.25/+1.25 bar||15.0/18.0 kW|
|DTLF 2.400||365/440 m³/h||+1.8/+1.8 bar||18.5/22.0 kW|
|DTLF 2.500||515/600 m³/h||+0.8/+0.8 bar||15.0/18.0 kW|
|DTLF 2.500||515/600 m³/h||+1.1/+1.1 bar||18.5/22.0 kW|
|DTLF 2.500||515/600 m³/h||+1.5/+1.5 bar||22.0/26.0 kW|
|DTLF 2.500||515/600 m³/h||+1.8/+1.8 bar||30.0/36.0 kW|
- 100% dry-running (oil-less) operation
- Quiet operation
- Long vane life
- Continuous duty rated
- Single shaft direct drive
- Compact design
- Variety of motors available
- Low operation and maintenance costs
- No cycling times
- Quiet operation – no silencer enclosures necessary
- Small footprint for space savings
- Straightforward construction for fast and easy service on-site to reduce downtime
Printing and Paper Industry
Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.
Vacuum pumps and compressors from Becker are the preferred solution for sparging, wastewater treatment, and aeration.
General Mechanical Engineering
Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.
Perfect for turning air into power, our vacuum pumps and compressors are built to withstand the high demands of working on construction sites.
Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.
Blowing & Injecting
Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.
Thank you very much for your message. We will get back to you as soon as possible.
PLEASE COMPLETE THE FORM BELOW.
"*" indicates required fields
YOU WOULD LIKE TO
CONTACT US DIRECTLY?
Becker Druk- en Vacuümpompen B.V.
8447 SP Heerenveen
T +31(0)513 65 18 00
Here you can find the contact close to you, because our support is available almost everywhere in the world. We are here for you!