Becker BCP series claw compressors are displacement pumps. It's operation chamber is 100% free of oil and contact. To achieve this, the claw-like rotors rotate within the compression chamber in opposite directions and are contactless. This makes the compressor particularly low-maintenance. The Becker BCP claw technology ensures a high degree of efficiency and low energy consumption.
Each BCP series pump comes standard with:
- Pulsation damper
- Built-in suction filter with clear cover
- Vibration isolators
Product information / specifications
|Volume flow 50/60Hz||Pressure relative 50/60Hz||Power 50/60Hz|
|BCP 100||100/120 m³/h||+0.8/+0.8 bar||3.0…4.0/3.0…4.0 kW|
|BCP 100||100/120 m³/h||+1.3/+1.3 bar||4.0/4.0…4.8 kW|
|BCP 100||100/120 m³/h||+1.5/+1.5 bar||5.5/5.5 kW|
|BCP 100||100/120 m³/h||+2.0/+2.0 bar||5.5…7.5/6.6…7.5 kW|
|BCP 150||150/180 m³/h||+1.0/+1.0 bar||5.5/5.5…6.6 kW|
|BCP 150||150/180 m³/h||+1.3/+1.3 bar||7.5/7.5 kW|
|BCP 150||150/180 m³/h||+1.7/+1.7 bar||7.5/7.5…9.0 kW|
|BCP 150||150/180 m³/h||+2.0/+2.0 bar||9.2…11.0/9.2…13.2 kW|
|BCP 300||275/325 m³/h||+1.3/+1.3 bar||11.0/11.0…13.2 kW|
|BCP 300||275/325 m³/h||+1.6/+1.6 bar||15.0/15.0 kW|
|BCP 300||275/325 m³/h||+2.0/+2.0 bar||15.0…18.5/15.0…18.5 kW|
- 100% oil-less operation chamber
- Non-contact compression
- Continuous duty rated
- Single shaft direct drive
- Compact design
- Variety of motors available
- Internal filtration with clear cover
- Pulsation damper
- No external filters needed
- Low maintenance, minimal maintenance costs
- Straightforward construction for fast and easy service on-site to reduce downtime
- Low energy consumption, low energy costs
- Quick visual check of filter status
Printing and Paper Industry
Whether you need an individual unit or a system, Becker's vacuum pumps, compressors for blast air, and combined pressure/vacuum pumps are made for the various processes used in the printing and paper industry - from the pre-press stage, to sheet fed and digital presses, to the post-press.
Vacuum pumps and compressors from Becker are the preferred solution for sparging, wastewater treatment, and aeration.
General Mechanical Engineering
Becker provides customised vacuum pump and compressor solutions for numerous mechanical engineering applications across the world, such as conveying, transporting, fixing, lifting, handling, drying, cooling and many more.
Low pressure and vacuum solutions are perfect for transferring powders, granules, flakes, and other small, dry, low bulk density products.
Blowing & Injecting
Compressors are used to build up pressure to supply air for the aeration of waste water, blast air for printing, wine presses, drainage system reliners, and other processes.
Thank you very much for your message. We will get back to you as soon as possible.
PLEASE COMPLETE THE FORM BELOW.
"*" indicates required fields
YOU WOULD LIKE TO
CONTACT US DIRECTLY?
T +41 58 590 18 18
Here you can find the contact close to you, because our support is available almost everywhere in the world. We are here for you!